How to Buy Metal Roofing Panels Online: Measure, Order, Deliver

To buy metal roofing panels online you need three measurements: the width of each roof plane, the length from eave to ridge, and the roof pitch. With those you can pick a panel profile, order every panel cut to length with matching trim and screws, and have the whole package delivered to the job site.

This guide covers each step in the order you will actually do it, whether you are a contractor pricing a job or a homeowner re-roofing a shop, barn or patio.

Step 1: Measure the roof

Sketch each roof plane as its own rectangle and write down:

  • Width along the eave. This decides how many panels you need.
  • Length from eave to ridge, measured along the slope. Not flat across the ground. Add the overhang you want at the eave. This is your panel length.
  • Roof pitch (rise over 12 inches of run). You will be asked for it when you order ridge cap.
  • Everything the roof runs into: hips, valleys, walls, a change in slope. Each one needs its own trim piece.

If you have plans instead of a finished roof, skip the tape measure and send them in for a free takeoff from your plans. For a simple patio cover, the patio roof panel calculator does the math for you.

Step 2: Pick a panel profile

Steeldash carries three exposed-fastener panels that cover most roofing jobs. The main differences are how much roof each panel covers and how tall the ribs are.

Panel Net coverage Major rib height Gauges listed
PBR panel 36" 1-1/4" 26, 24 and 22
5/8" corrugated panel 30" 5/8" 26 and 24
7.2 panel 36" 1.5" 26 and 24

PBR is the everyday choice for shops, garages, barns and patio covers. Its wider overlap leg gives a solid lap between panels. The 5/8" corrugated panel is the classic wavy profile, popular on homes, accents and fences. The 7.2 panel has the deepest ribs of the three and is the one to look at when the framing is spaced further apart.

How far any panel can span between supports depends on your framing, loads and local code. Confirm that with your engineer or local building department before you order.

Step 3: Choose gauge and color

Gauge is the steel thickness, and the scale runs backwards: a lower number is thicker steel. Most painted colors are listed in 26 gauge, with a smaller set of colors in 24 gauge and bare PBR available in 22 gauge.

For finish you can go bare (Galvalume or galvanized) or painted. Painted PBR colors include Polar White, Matte Black, Charcoal, Burnished Slate, Ash Gray, Cocoa Brown, Country Red and Hawaiian Blue, plus wood-print and garden-print panels. Each color and gauge is its own product page, so the price you see is for exactly what you picked.

Step 4: Work out panel count and length

Every panel is ordered by length, from 1 foot up to 40 feet in 6-inch steps. That means one continuous panel from eave to ridge on most roofs, with no end laps to seal.

  1. Count: convert the roof width to inches, divide by the panel's net coverage and round up. A 24-foot-wide roof plane is 288 inches. With a 36" panel that is 8 panels. With the 30" corrugated panel it is 10.
  2. Length: take your eave-to-ridge measurement plus overhang and round up to the next 6 inches.
  3. Repeat for each roof plane. A simple gable roof has two.

On the product page, pick the length, set the quantity and add to cart. Different lengths of the same panel go in as separate lines.

Step 5: Add trim, screws and closures

Panels alone are not a roof. Before you check out, add:

  • Trim: eave trim along the low edge, rake trim up the gable ends, ridge cap at the peak, valley trim where two slopes meet and transition flashing where the pitch changes. All of it is in metal roofing trims, in colors that match the panels. Most pieces come in 8, 9 and 10 foot lengths, and many also come in a 6 foot 10 inch length that ships more economically.
  • Screws: metal-to-wood screws if you are fastening to lumber, metal-to-metal screws for steel purlins, and stitch screws for the laps and trim. Screws and fasteners come 250 to a bag in matching colors.
  • Closures and sealant: foam closure strips shaped to your panel profile fill the gaps under the ribs at the eave and ridge, and butyl tape seals the laps. Both are in foam closures and sealants.

Not sure you caught everything? The free takeoff gives you a full materials list to check your cart against.

What delivery looks like

Panels are made to your lengths, so plan on delivery within 3 weeks of ordering. Shipping is simple: $299 flat rate shipping on orders over $749 in CA & TX, over $1,500 elsewhere. If you are nearby, there is also free pickup in Fontana, CA.

Long panels arrive on a truck, not in a box. A little prep makes delivery day easy:

  • Make sure a truck can get in and out of the site.
  • Clear a flat, dry spot to stack the bundle.
  • Have enough help on hand to carry long panels without bending them.
  • Count the pieces and look them over against your order before the driver leaves.
  • Keep the bundle dry and off the ground until you install.

Quick answers

Can I buy metal roofing panels online and have them delivered?

Yes. You choose the panel, color, gauge and exact lengths on the product page, and the order ships to your address or job site. Delivery is within 3 weeks of ordering.

How many metal roofing panels do I need?

Divide the roof width in inches by the panel's net coverage and round up. PBR and 7.2 panels cover 36 inches each and 5/8" corrugated covers 30 inches.

What length should I order?

Measure from the eave to the ridge along the slope, add your eave overhang and round up to the next 6 inches. Panels are available from 1 to 40 feet.

What else do I need besides panels?

Eave, rake and ridge trim, color-matched screws, foam closures and butyl tape. Roofs with valleys or a pitch change also need valley trim or transition flashing.

Which gauge should I buy?

26 gauge has the widest choice of colors. 24 and 22 gauge are thicker steel. For anything structural, confirm the gauge with your engineer or local building department.

Ready to order?

Steeldash is about Making Steel Inspirational, Accessible and Affordable. Start with the PBR panels, or send us your plans for a free takeoff and we will build the list with you.

Call or Text 1(855) 697-2182

Shop now