PBR vs 5/8" Corrugated vs 7.2 Panel: Which Panel for Which Job
Pick PBR panel for most roofs and walls on shops, barns, garages and metal buildings; pick 5/8" corrugated when the classic wavy look matters more than rib depth, such as siding, fences, accents and smaller covers; pick 7.2 panel when you want the deepest rib and a bold, commercial look. All three are exposed-fastener steel panels, so the real differences are rib height, coverage width and appearance.
Below is a plain comparison of PBR vs 5/8" corrugated vs 7.2 panel, based on what we actually stock at Steeldash, followed by which panel fits which job and how to order it online.
PBR vs 5/8" corrugated vs 7.2 panel at a glance
| PBR Panel | 5/8" Corrugated | 7.2 Panel | |
|---|---|---|---|
| Net coverage width | 36" | 30" | 36" |
| Major rib height | 1-1/4" | 5/8" | 1-1/2" |
| Fastening | Exposed fasteners | Exposed fasteners | Exposed fasteners |
| Gauges we list | 26, 24 and 22 | 26 and 24 | 26, 24 and 22 |
| Look | Tall, squared ribs with flat pans between | Soft, continuous wave | Deep, evenly spaced box ribs |
| Most common jobs | Roofs and walls on shops, barns, garages, carports | Siding, fences, accent walls, small roofs and covers | Commercial and industrial roofs and walls, bold architectural siding |
PBR panel: the everyday workhorse
PBR stands for purlin bearing R panel. What sets it apart is the lap: one edge has a larger overlap section that fully overlaps the next panel. That gives more metal-to-metal contact at every seam, which makes for a stronger connection and less chance of leaks.
Each panel covers 36 inches with a 1-1/4 inch major rib. It is the profile most people land on because it balances durability, appearance and cost, and it works on both roofs and walls.
Choose PBR when:
- You are roofing or siding a shop, barn, garage, carport or metal building.
- You want the widest choice of colors and gauges. Our PBR panel collection has the most options of the three profiles, including painted colors and bare finishes like Galvalume bare in 26 gauge.
- You want fewer seams. At 36 inches of coverage, a 30-foot run takes 10 panels.
5/8" corrugated: the classic wave
This is the traditional corrugated profile most people picture when they hear "corrugated metal." The rib is a shallow 5/8 inch and each panel covers 30 inches. It is a multipurpose roofing and wall cladding panel used on residential, commercial and architectural projects.
Because the wave is low and continuous, it reads as texture rather than as structure. That is why designers and homeowners like it for visible surfaces.
Choose 5/8" corrugated when:
- The look is the priority: siding, wainscot, accent walls, interior feature walls.
- You are building a metal fence or privacy screen and want a clean, uniform pattern on both runs.
- You are covering a smaller roof, shed or patio where a classic profile suits the house.
Keep the narrower coverage in mind when you count panels. The same 30-foot run that takes 10 PBR panels takes 12 corrugated panels. Browse colors in the 5/8" corrugated metal panel collection.
7.2 panel: the deep-rib option
The 7.2 panel has the tallest rib of the three at 1-1/2 inches, with 36 inches of coverage. Its symmetrical design and the depth and number of its ribs make it one of the strongest corrugated-style panels available, which is why it shows up on commercial and industrial roofs and walls.
It also has a strong visual presence. The deep, evenly spaced ribs throw hard shadow lines, so it is a popular pick for modern siding and storefront accents.
Choose 7.2 panel when:
- You are working on a commercial, industrial or agricultural building that calls for a deep-rib panel.
- Your plans or engineer specify a 7.2 profile.
- You want a bolder, more architectural rib than PBR on a wall.
See finishes and gauges in the 7.2 panel collection. How far any panel can span between supports depends on gauge, loads and your framing, so confirm spans and attachment with your engineer or local building department.
Which panel for which job
Shop, barn or garage roof
PBR is the usual answer. The full overlap at each seam suits roof work and the color range is the widest.
Patio cover or carport
PBR for a simple, cost-effective cover; 5/8" corrugated if you want it to match a traditional or farmhouse-style home. Our patio roof panel calculator will work out the panel count for you.
Siding and accent walls
5/8" corrugated for a softer texture, 7.2 for a bold shadow line, PBR when the wall needs to match a PBR roof.
Fence or privacy screen
5/8" corrugated is the most common choice. PBR also works well when you want a taller rib.
Commercial or industrial building
7.2 panel or PBR, depending on what the drawings call for. Send us the plans and we will do a free takeoff.
How to order any of the three online
- Pick the profile and color. Each color and gauge has its own product page.
- Pick the length. Panels are cut to length. PBR and 5/8" corrugated are listed from 1 foot to 40 feet in 6-inch steps, so you order the length your roof slope or wall height needs instead of trimming stock sheets.
- Count panels by coverage. Divide the width of the roof or wall by the net coverage: 3 feet for PBR and 7.2, 2.5 feet for 5/8" corrugated. Round up.
- Add the parts that finish the job. You will need matching metal roofing trims, screws, and profile-matched foam closures and sealant tape. We stock closures made for PBR, 5/8" corrugated and 7.2 panels, and they are not interchangeable.
Shipping is simple: $299 flat rate shipping on orders over $749 in CA & TX, over $1,500 elsewhere. Delivery is within 3 weeks of ordering, and there is free pickup in Fontana, CA.
Quick answers
Is PBR panel stronger than corrugated?
PBR has a taller rib (1-1/4" vs 5/8") and a full overlap at each seam, so it is generally the sturdier choice in the same gauge. For actual load and span numbers on your project, check with your engineer or local building department.
What does 7.2 mean on a 7.2 panel?
It refers to the rib spacing: the major ribs repeat every 7.2 inches across the panel. Our 7.2 panel covers 36 inches with a 1-1/2 inch rib.
Can I use PBR, corrugated and 7.2 panels for both roofing and siding?
Yes. All three are sold as roof and wall panels and all three use exposed fasteners. Roof slope and attachment requirements vary by profile and location, so confirm the details for your roof before you order.
Which panel is best for a metal fence?
5/8" corrugated is the most popular for fences because of its even, low-profile wave. PBR is a good alternative if you want deeper ribs.
How many panels do I need?
Divide the width you are covering by the panel's net coverage (36" for PBR and 7.2, 30" for 5/8" corrugated) and round up. Panel length equals your roof slope length or wall height, plus any overhang.
Ready to order?
At Steeldash we are all about "Making Steel Inspirational, Accessible and Affordable." Choose your profile, pick a color and length, and check out online. If you are not sure which panel fits your job, send us your plans or a quick sketch and we will help you sort it out.
Call or Text 1(855) 697-2182







